fbpx

Tag Archives: Acrylic electric panel cover

Jelec Inc. – Houston, TX

Jelec Inc. - Houston, TX - Acrylic Panel Cover Jelec Inc., of Houston, TX called upon us to design a protective enclosure w/gaskets, to cover their power distribution box. This was fabricated with .25” thick clear acrylic, all edges smooth and polished, hinged on the top (long side) and a cam lock. Size is 7" x 15". The power distribution panel is for an oil rig out in the ocean so weather proof gasketing was applied to seal the door...
Read More

Rigetti Computing – Berkely, CA

Custom Acrylic Panel Cover with Sliding Access Face Custom acrylic control panel cover with sliding access face for master switch controls board, with separate top and bottom acrylic rails and two handles installed at each end instead of "pull holes," and mounting screw holes pre-drilled. Made with .25" clear acrylic, size: width 22 3/8" x 18 7/16" height x 1 1/4" deep, all edges and corners polished and smooth. All our custom acrylic covers can be made to any size.
Read More
Close up view of custom made panel enclosure for Aldon Electric

Aldon Electric – Boston, MA

Aldon Electric Custom made Panel Enclosure from .500 Opaque white Acrylic. The unit size is 26" wide x 61" tall x 1.5" deep. Inside flanges to mount to wall, upper flanges for gasket - gasketing material supplied and pre-installed at wall mounting and at door closing - Hinge 1 side, latches to keep door closed - pre-drilled mounting holes at owners' location - all edges smooth and polished.
Read More